Plat a deed

1 viewer

Description A metes-and-bounds description as recorded. Calls start at THENCE; a description that says COMMENCING is walked to the point of beginning first and the tie is drawn dashed. Bearings may be N 45°30'15" E, N45-30-15E or spelled out; curves give their radius with a central angle, arc length or chord. Clauses that cannot be read are listed and left out.NameClose the figure byFeet areFor a description in feet; a description in metres is drawn in metres.First point northingWhere the first point described sits on the drawing: the commencement point, or the point of beginning when there is none.First point eastingState Plane zone (EPSG)Optional. With the latitude and longitude of the point of beginning, the parcel is also placed on the earth.Point of beginning latitudePoint of beginning longitudeEllipsoid height (m)Bearings are referenced to true northTurned onto grid north by the zone's convergence there; leave unchecked for grid bearings.Drawn byDate

Cancel

The plat's corners are fixed where the closed traverse puts them and each curve keeps its record radius, so the drawing opens fully constrained. Labels are the description's own bearings and distances; a note on the sheet gives the misclosure, the precision and the rule that closed it. The sheet scale is the largest engineering scale (feet) or ratio (metres) at which the parcel fits. A zone with the latitude and longitude of the point of beginning also places the parcel on the earth as GeoJSON; NAD83 positions are written as WGS 84 without a datum shift.

New plat