1 viewer
Fab machine
Walk printer mut0co4v
A printer keeps the permissive path: pre-flight reports bounds but does not gate a send.
- Kind
- 3D printer (FDM)
- Dialect
- marlin
- Envelope
- 220 × 220 × 250 mm
- Revision
- 1
The web Stop is not an emergency stop. Keep the machine's physical e-stop within reach.
no controller report yet last known
Hold, resume, stop, continue, jog and zero are shown to this machine's owner.
Profile
| Machine id | walk-printer-mut0co4v |
|---|---|
| Kind | 3D printer (FDM) |
| Controller | marlin |
| Port | shown to the owner |
| Baud | 115200 (default) |
| X envelope | 0 … 220 mm (travel 220 mm, max feed 9000 mm/min) |
| Y envelope | 0 … 220 mm (travel 220 mm, max feed 9000 mm/min) |
| Z envelope | 0 … 250 mm (travel 250 mm, max feed 1200 mm/min) |
| Max spindle | — |
| Laser full-power S | — |
| Homing | no |
| Probe | no |
| Station | walk-print-mut0co4v |
| Owner | account-a1a1c77d8735e292 |
| Revision | 1 |
No tool table: the pre-flight counts tools and tool changes but checks no tool against a table.
Jobs on this machine
No job on this runtime has been pre-flighted on or sent to this machine.